Search from various English teachers...
Profile
Learning
English
Language Skills
SwedishNative
Lesson Feedback
Lesson history
 Last monthLast 3 monthsAll time
Completed lessons000
Attendance rate100%100%100%
Teacher reviews
No record
Activities
  • Answered
    Hi Jordana :) 1. You would say, "she was never single, nor a mum" (mom = American) 2. "He left and went to play" "He finished eating and went to watch TV" "He left me here to go read a book" "He said goodbye to me and went to read the newspaper"?
    0 voted
    September 28, 2017
    1
  • Corrected

    about myself

    My name is Sasha. I was born on the 20th of November in Perm. My horoscope is Scorpio and because I believe horoscopes are true/accurate, if you would like to know more about my character you can read my horoscope. It describes me better than I can describe myself. My family is not big, there are my parents and I. Unfortunately I don’t have any brothers or sisters. As a child I spent my early years in kindergarten. I was an active girl, full of energy and with a lot of friends. I spent my summers with my grandparents in the village. This was a wonderful time for me. I spent every day with my friends on river or we played games, biked or wandered. These friends are still my best friends now.
    My hobbies include reading – I prefer English classical literature like Bronte sisters or Jane Austin. I like painting. My favorite orientation in painting is Early Netherlandish painting known as the Flemish Primitives. I admire this style, because you can spend more time near the paint and every moment discover the new important detail. My favorite one is The Hunters in the Snow
    by Pieter Bruegel the Elder. I like sport, especially biking and running. My dream is to run the marathon. I prefer to run when it's cold. The colder it is outside, the better and further I can run. I like travelling. My biggest dream is to visit every country in the world. Every place in the World is so different and interesting, nature is so unique. I want to make my dreams comes true.

    0 voted
    October 25, 2016
    1
  • Corrected

    My first Breakout board for printers. (second part)

    After over two hours doing tests on the printer, I have figured out that the printer has a procedure to become ready to print. This procedure is composed of several test routines that check all the sensors in the printer.
    The biggest problem is that these routines are implemented at the same time.
    There are four optical sensors in the printer. Two of them are optical encoders. One in the axis motor, that sends the paper ahead and controls its position. One in the printhead axis, that controls the position of printhead. There are two common optical sensors to check the paper feed. One is in the mechanism that catches the paper and another is over the axis and it checks if the paper is in the right position over the axis. Both work together. The printer also has a routine to check if the cleaner mechanism is working well and this check is made by the encoder sensor under the printhead. To start up, the printer works like this:
    1) Check if the encoder on the printhead is working fine. To do that it moves the printhead for few millimeters from right to left and then from left to right.
    2) There is a kind of brace that holds the printhead in the right position, to avoid damaging it. This brace is handled for the cleaning mechanism. When the motor of cleaner goes counter-clockwise, it releases the brace and allows the printhead to go across all of the axes. If the cleaning mechanism is not working (well), the printer shows a general error. 
    3)At the same time, the printer checks the Paper Feed sensor and the encoder of the axis motor. On power up, the sensor of Paper Feed must be a high signal (3.3 V). So the printer moves the motor counter-clockwise until this signal is high and then clockwise until it is a low signal. At same time, it checks the motor axis encoder, moving few a milimeters forward and backward.
    4) The printer checks the Paper Sensor to see if there is a paper jam inside of it. If the signal is high, there is no paper jam. If the signal is low, there is a paper jam and to solve that, the printer moves the axis motor forward quickly and at the same time, does an entire rotation of/inside the mechanism of the Paper Feed. If the paper sensor is still low after some time, the printer shows a general error.
    5)Some printers also check the cartridges to see if it's all ok, but this is not the case with the printer I have bought.
    6)After that, printer checks if it is time to clean the printhead. This is not a complicated task, so it doesn't matter.
    FYI (plural of axis = axes)
    0 voted
    October 17, 2016
    2