who know about Aluminum T6?
Search from various English teachers...
Answers · 2
1
well, to get to the -T6 temper, the 6061 is heated to about 990F, then quenched in water, then aged at about 350F for around 8 hours. That changes the typical yield strength from 8 ksi to about 40 ksi- fairly substantial.
But that quenching in water puts residual stresses in the aluminum, since there is a surface-to-center cooling gradient. The -T651 designation means the mill took that extrusion and gave it a 1% to 3% stretching, or permanent set, to get rid of some of those residual stresses. Now we can machine it and it shouldn't distort.
Finally, the final digit in the -T6511 designation (and how I know it was an extrusion, since this only applies to extruded stock) means that the mill is allowed to straighten the extruded bars, like in a press, to get them to meet the straightness tolerances.
please look at:
http://www.finishing.com/362/40.shtml
I hope it could help.
0
Language Fan is absolutely correct.
Still haven’t found your answers?
Write down your questions and let the native speakers help you!
Don’t miss out on the opportunity to learn a language from the comfort of your own home. Browse our selection of experienced language tutors and enroll in your first lesson now!
Start Learning Today
